Skip to content
HVAC Leak CheckUK HVAC measurement reference
Menu

FOR EQUIPMENT OWNERS

Who should I call about a suspected heat pump leak?

Note what you can see from outside the unit and choose between your installer, a heating engineer or a refrigerant specialist.

Two outdoor air conditioning units on mounts beside a wall
Use the actual unit label and the corresponding record when booking service. Photo: Secretlondon · CC BY-SA 4.0

Water near a heat pump is not a reliable sign of a refrigerant leak. On an air source unit, moisture can collect on the outdoor coil and drain as it defrosts. A leak from the heating water side is a different problem. Loss of heating, a repeated fault or unusual noise can have several causes. Your installer or repair contractor can distinguish the routes using the actual model and system configuration.

Record what you can see without opening the unit

Note where the moisture appears, when it happens and whether it coincides with an alarm, loss of heating or a visit. Take a picture from a safe and accessible position. Use an existing display or the system documentation for the equipment ID. Do not remove panels, touch refrigerant pipe connections or try to add gas to identify the fault.

Two outdoor air conditioning units on a raised mounting platform
An outdoor unit photograph can show the location without identifying a fault. Photo: Dinkun Chen · CC BY-SA 4.0

Start with the people who know the system

Contact the installer or existing heat pump maintenance provider first, especially if you have a warranty or service plan. Describe the symptom and let the contractor decide whether a water-side or refrigerant specialist is needed. For work on a circuit that contains F gas, check the applicable technician qualifications and company certification. In Northern Ireland, check the DAERA guidance. The installer can also tell you which credentials are appropriate for other refrigerants.

Ask which checks are included, how any fault will be recorded and what the contractor recommends next. Share the service documents you already have.

Common questions

Can I confirm a refrigerant leak from a photograph?

A photo can show where an observation was made. It cannot establish the refrigerant or gas circuit condition.

Who should I call first if I think my air source heat pump is leaking?

Start with the original installer or the service contact in the equipment paperwork. Describe where and when the water appeared and whether heating or alarms changed, so they can route the call.

Does a damp patch by the indoor heating pipe prove I have lost refrigerant?

A damp patch is a location clue. A service engineer still needs to establish which part of the installation is involved, such as water-side pipework or drainage, before identifying the fault.

Does it help to log whether water appears during defrost or all day?

Yes. The timing is useful context. Note whether the water appears briefly during or after a defrost cycle, persists throughout operation, or appears while the unit is idle.

Sources and further reading